SPEEDBIRD
Drop-in VARA replacement

Swap the modem. Keep your apps.

SPEEDBIRD speaks the VARA HF TNC host protocol on the same TCP ports VARA uses. Winlink Express, Pat and VarAC connect to it exactly as they connect to VARA, with no reconfiguration. Underneath, the RF link is SBP: adaptive OFDM with LDPC and ARQ, from −28 dB up to 16QAM.

Before
Winlink Express · Pat · VarAC
TCP 8300 / 8301
VARA HF
sound card + CAT
Radio
After
Winlink Express · Pat · VarAC unchanged
TCP 8300 / 8301 same ports
SPEEDBIRD SBP modem + TX arbiter
sound card + CAT, or LAN
Radio

What "drop-in" means#

How it handles VARA commands#

Your app sends SPEEDBIRD does
MYCALL K4MFC-7 Records it; the SBP modem runs under this call
LISTEN ON / OFF Incoming SBP sessions raise PENDING, then CONNECTED <peer> <mycall> 2300
CONNECT <my> <target> Opens an SBP session; CONNECTED, or DISCONNECTED after 120 s without an answer
DISCONNECT / ABORT Graceful close / immediate stop with TX abort
BW500/2300/2750, PUBLIC, CHAT, COMPRESSION, P2P SESSION, WINLINK SESSION OK. SBP adapts its own bandwidth and rate
VERSION VERSION SPEEDBIRD-SBP <version>
ENCRYPTION … WRONG, always (Part 97)
CONNECT … VIA … WRONG (no digipeating yet)

Winlink's B2F protocol and compressed blocks pass through byte-for-byte. If the SBP link drops between bursts, the TNC keeps your logical session open and reopens the link on the next write. Full TNC reference →

What you gain#

Adaptive speed ladder

Eleven levels, from ultra-weak FST4-style tiers to 16QAM 3/4, chosen from the measured SNR.

Many radios at once

A TNC port for each radio, plus bonded transfers that stripe one file across several radios.

Mesh and relay

Store-and-forward routing between stations, bands and frequencies.

Published on-air spec

SBP is fully documented, as §97.309(a)(4) requires for data emissions.

Guarded transmit

Every transmission passes the TX arbiter's callsign, band, power and timeout checks, and is logged.

Runs anywhere

Windows desktop, Linux server or VM, and Raspberry Pi.

Know before you switch#

SBP is not VARA on the air. SPEEDBIRD replaces the VARA program on your computer, not the VARA waveform. The station you connect to must also run SPEEDBIRD (or another SBP implementation). A real VARA station can't decode SBP, and SPEEDBIRD doesn't contain or emulate the VARA modem.

Need to reach VARA stations or Winlink RMS gateways over RF as well? Keep your licensed VARA and let SPEEDBIRD drive it through VARA's TCP host interface. Both kinds of connection then come from the same UI and the same Pat profiles. See the VARA host client.

Switch in five minutes#

  1. Install SPEEDBIRD: Windows or Linux & Pi.
  2. Close VARA, so its TCP ports are free.
  3. Import: click Import VARA config… in the SPEEDBIRD window or on the Radios page. Pick your files (the usual folders are offered for one click), check the preview, and apply. TX stays off for imported radios.
  4. Check audio and PTT on the Radio audio panel, run Tune TX…, then enable TX.
  5. In Winlink Express, open Settings → VARA TNC Setup. Host 127.0.0.1, same ports, and clear Automatically start VARA. Under Radio Setup, choose no rig control and no PTT: SPEEDBIRD owns the radio.
  6. Start your session as usual.

Pat users: point varahf.addr at 127.0.0.1:8300 with rig empty and ptt_ctrl false. Pat also comes bundled with SPEEDBIRD and is managed for you. See the Windows guide.

Privacy: your VARA registration key, passwords and e-mail settings are never imported, stored or shown.

VARA is a product of EA5HVK. SPEEDBIRD is an independent product, not affiliated with or endorsed by EA5HVK. It interoperates with VARA's documented TCP host interface only.