SpeedBird-WIN
SPEEDBIRD as a desktop app for the shack PC. The modem, decoders, waterfall, TX arbiter and VARA-compatible TNC run in-process. Radios connect through the PC's sound cards and a CAT link, and as many as you like can run at once.
Install in one line#
Open PowerShell (no administrator needed) and run:
PS> irm https://speedbird.io/install.ps1 | iexIt downloads the latest installer, checks its SHA-256 and starts the setup wizard.
Install and first run#
- Run
SPEEDBIRD-Setup-<version>.exe. It installs to%LOCALAPPDATA%\Programs\SPEEDBIRDwithout administrator rights and adds Start-menu entries. - Start SPEEDBIRD Modem. The first run creates
%APPDATA%\SPEEDBIRD\speedbird.yaml. Setstation.callsignthere: nothing transmits while it'sN0CALL. - The window opens on Radio audio, with links to Radios, Console, Spectrum and the rest of the interface.
Just looking around? Start with SPEEDBIRD.exe --sim on the first run to get a simulated radio and demo source.
Your radios, your sound cards#
Add a radio on the Radios page with the soundcat driver: pick the RX/TX sound devices, channel, CAT type and port, and PTT method.
| Supported | |
|---|---|
| CAT | Icom (CI-V serial or LAN), Kenwood, Yaesu, Elecraft, Hamlib rigctld, or none (receive only) |
| PTT | CAT, RTS, DTR, VOX, none |
| Audio | WASAPI (preferred), MME, DirectSound; by device name or index |
TX needs a CAT link that can set RF power. The TX arbiter caps power before it keys and refuses to transmit if it can't.
Levels that set themselves#
- RX and TX meters with a clip light, plus a 0–4 kHz waterfall for each radio
- Auto RX gain: a slow AGC, or "set once and hold"
- Tune TX… sends short two-tone bursts, reads the radio's ALC meter and keeps the highest level with zero ALC, stored per band. It only runs when you click and confirm.
Coming from VARA?#
Import VARA config… reads VARA.ini, VarAC.ini, VarAC_frequencies.conf and Winlink Express's RMS Express.ini. It previews the radio, TNC port, callsign and frequencies before changing anything. TX stays off until you check audio and PTT. Registration keys, passwords and e-mail settings are never imported.
Winlink Express and Pat#
Each radio gets a VARA HF-compatible TNC port on 127.0.0.1. Point Winlink Express or Pat at it and leave rig control and PTT to SPEEDBIRD. The installer ships the official Pat release and runs it for you on the Winlink page.
Note: the RF link is SBP, not VARA. The station you call must also run SPEEDBIRD.
Also included#
The installer ships Pat (MIT) and an optional Meshtastic bridge (GPL-3.0), each as a separate program with its own licence. External decoders (dsd-fme) and Hamlib rigctld aren't bundled; SPEEDBIRD uses them if you install them.