How can we help?
Start with the docs. If you're still stuck, e-mail us; a real operator reads every message.
E-mail support
support@speedbird.io
For installation problems, bugs, radio compatibility and licensing questions.
Write to usRequest a feature
Missing a radio, a mode or a workflow? Tell us what to build next.
Open the formDocumentation
Install guides, Winlink and VARA setup, beacons and the full SBP specification.
Browse docsHelp us help you#
Put these in your e-mail and we can usually answer on the first reply:
- Edition and version: VM, WIN or PI, and the SPEEDBIRD version
- OS: for example Ubuntu 24.04, Windows 11 or Raspberry Pi OS
- Radio(s): model, how it's connected (LAN, USB sound card + CAT), and the PTT method
- What happened: what you did, what you expected, and what you saw instead
- Logs:
- Linux / Pi:
journalctl -u speedbird --since "1 hour ago" - Windows:
%LOCALAPPDATA%\SPEEDBIRD\logs\speedbird.log
- Linux / Pi:
Never send passwords. We will never ask for your Winlink password or radio LAN password. Remove them from config files before you attach them.
Common questions#
Nothing transmits.
Check that station.callsign is set. SPEEDBIRD never transmits as N0CALL. Also check that tx_enabled is on for the radio and that the CAT link can set RF power: the TX arbiter refuses to key a radio it can't power-limit.
Can I reach a real VARA station or the Winlink network over RF? SBP is not VARA on air, so SBP profiles reach other SPEEDBIRD stations. To reach VARA stations and Winlink RMS gateways, drive a licensed VARA modem through SPEEDBIRD's VARA host client, or use Winlink's telnet connection.
Is the web UI safe on the internet? Not yet: it has no authentication. Keep it on a trusted network, or reach it through a VPN or SSH tunnel.
Why does the modem refuse to start on a second radio? Each radio needs its own SSID (for example K4MFC-6, -7, -8), because the mesh routes by callsign.